Instruction manual

User instructions
14
The ULTRA CLEAN program terminate with an extra anti-bacteria rinse that ensures
a further reduction in the bacteria level. If the temperature falls during this stage of the
program (e.g. because the door is opened or due to a power blackout), the program
lights flash to warn that the anti-bacteria effect is not guaranteed.
(*) Standard program according to EN 50242 - EN 60436. The ENERSAVE option (if
present) must be enabled. For consumption data, please see the information sheet
provided.
(1) Consumption and program duration are measured according
to EN 50242 EN 60436. The values may vary due to various factors, such as the inlet
water temperature and the number of dishes.
(2) With the option ENERSAVE selected (default) / not selected.
Notice for testing institutes
Testing institutes are provided with guidelines for comparative tests (e.g. according to
EN60436). request the guidelines by contacting us at the following
e-mail address: [e-mail]
When making a request, please specify the model (MOD) and the serial number (S/N)
indicated on the plate on the side of the door.
Description of the programs:
SOAK
Pans and dishes awaiting completion of
the load
RAPID 27’
Quick cycle for lightly soiled dishes,
washed immediately after use.
GLASS
Glass, china and mixed dishes with
light dirt.
QUICK DELICATE
Delicate dishes with normal dirt.
ECO
Cycle with lowest water and energy
consumption, for washing normally
soiled dishes, even with dried-on
residues.
QUICK ECO
Dishes with normal dirt, washed
immediately after use.
AUTOMATIC
Pans and dishes with normal dirt, even
with dried-on residues.
MIX EXPRESS
Dishes with normal dirt, washed
immediately after use.
ULTRA CLEAN
Very dirty pans and dishes, even with
dried-on residues.
FAST and STRONG
Quick cycle f
or normally soiled mixed
loads, and pans,
with normal dirt without
dried-on residues.