User manual

User instructions

3. DESCRIPTION OF THE CONTROLS

3.1 Upper panel

All the dishwasher controls are grouped on the upper panel. Switch-on,

programming, switch-off, etc. procedures are only possible when the

door is open.

1 ON/OFF BUTTON

SELECTED PROGRAM INDICATOR LIGHTS

Illumination of this light denotes the program selected and the

occurrence of a fault (troubleshooting).

3 PROGRAM SELECTION BUTTON

4 SALT INDICATOR LIGHT (only some models)

5 RINSE AID INDICATOR LIGHT

PROGRAM DELAY BUTTON

Press this button to delay the start of the program.

7 INFORMATION DISPLAY

8 OPTIONS

9 SANITATION INDICATOR LIGHT (Sanitized)

Shows that sanitation has been completed.

SETTING THE WASHING PROGRAM AND SWITCHING ON

After identifying the most suitable program with the aid of the programs

table:

 Press the ON/OFF button (1) and wait for the PROGRAM

INDICATOR LIGHT (2) to illuminate;

 Keep pressing the PROGRAM SELECTION button (3) until the

indicator light corresponding to the desired program illuminates;

 select the option required (if any and if the model provides options);

 close the door; after about 2" the program will start LIGHT will

flashing (indicating that the program is being executed).