User manual

User instructions
18
PROGRAMS TABLE
Program
Pre-wash
Wash
Rinse
Drying
(1) Duration (min)
Water consumption
(liters/cycle)
(1) Energy consumption
(KWh/cycle)
P1 HALF LOAD -
65°C
(149°F)
cold
70°C
(158°F)
● 82
12,9l
3,4gal.
1,10
P2 NORMAL (2) -
45°C
(113°F)
cold
65°C
(149°F)
●
100
12,9l
3,4gal.
0,81
P3 DELICATE cold
50°C
(122°F)
2 cold
70°C
(158°F)
● 83
19,3l
5,1gal.
1,00
P4 MIX cold
65°C
(149°F)
-
70°C
(158°F)
● 95
12,9l
3,4gal.
1,35
P5
(3)
POTS &
PANS
ETL
SANITATION
LISTED
hot
70°C
(158°F)
2 cold
70°C
(158°F)
● 112
19,3l
5,1 gal
1,60
Switching on
Press the on/off button to start the dishwasher. Then wait for one of the program
indicator light to turn on.
IMPORTANT
The door of the dishwasher must ble closed within 4 seconds after use of the
program selection button for all functions (e.g. program selection, change, delection,
etc.). If the door is not closed within 4 seconds, one or more program lights
(depending on the current opertaion) will flash at high speed to indicate that the
operation must be confirmed before the door is closed.
To confirm, simply press the program selection button once and the flashes will
slow down; close the door an once to start/restart the dishwasher.
The same applies if the dishwasher is opened with the program delay option set
and the cycle not started (e.g. to add more dishes): the program selection button
must be pressed before the door is closed, restarting the program delay countdown.
If the door of the diishwashehas not been closed or has been incorrectly closed, the
washing cycle will not begin