User manual

User instructions

SETTING THE WASHING PROGRAM AND SWITCHING ON

After identifying the most suitable program with the aid of the programs

table:

 Press the ON/OFF button (1) and wait for the PROGRAM

INDICATOR LIGHT (2) to illuminate;

 Keep pressing the PROGRAM SELECTION button (3) until the

indicator light corresponding to the desired program illuminates;

select the option required (if any and if the model provides options);

 close the door; after about 2" the program will start LIGHT will

flashing (indicating that the program is being executed).

Switching on

Press the on/off button to start the dishwasher. Then wait for one of the

program indicator light to turn on.

IMPORTANT

The door of the dishwasher must ble closed within 4 seconds after use

of the program selection button for all functions (e.g. program selection,

change, delection, etc.). If the door is not closed within 4 seconds, one or

more program lights (depending on the current opertaion) will flash at

high speed to indicate that the operation must be confirmed before the

door is closed.

To confirm, simply press the program selection button once and the

flashes will slow down; close the door an once to start/restart the

dishwasher.

The same applies if the dishwasher is opened with the program delay

option set and the cycle not started (e.g. to add more dishes): the

program selection button must be pressed before the door is closed,

restarting the program delay countdown.

If the door of the diishwashehas not been closed or has been incorrectly

closed, the washing cycle will not begin.