User manual

User instructions
16
OPTION SELECTION
Options are selected by pressing the relative button by the symbol of the
option required; the light comes on to confirm that the option has been
activated.
 It is not possible to select any options when the soak program
is being used.
 All options except "Flexi Tabs" are disabled at the end of the
wash cycle.
 To disable the “Flexi Tabs” option, press the relative button
(the light goes out).
 All options, including "Flexi Tabs" are disabled when a program
is
CANCELLED
after it has begun.
QUICK TIME OPTION
Select this option together with any washing program (except the soak
program) to SHORTEN the cycle. To activate this option, press button (light
comes on) after selecting the program required.
The option is automatically deactivated at the end of the program.
1/2 LOAD FLEXI ZONE
Ideal if just a few dishes need to be washed, allowing energy savings. The
dishes should be placed in both baskets and less detergent should be
placed in the detergent dispenser compared to the amount used for a full
load.
DELAYED START
The start of the washing program can be delayed to program the dishwasher
to operate at the preferred time of day (e.g. overnight). Press the
PROGRAM DELAY button to activate the option and display a 1 hour
delay. Keep pressing to select the delay required, which may be up to 9, 12
or 24 hours depending on the model.
When the door is closed, the appliance will prewash the dishes, after
which the "program delay" set will come into effect.