Instruction manual

User instructions
12
DELAY
Allows you to program the dishwasher cycle to start during the required
time period (e.g. night). Press the DELAY button to delay the start for up
to 3, 6, 9 hours. To cancel the setting, press the button several times until
the lights switch off. The option cannot be selected once the cycle is
running. After the door has been closed, the dishwasher will carry out a
pre
-
wash cycle, after which the set “cycle delay” option will be activated.
CANCELLING THE CURRENT PROGRAM
 To cancel the currently selected program open the door and hold
down the PROGRAM SELECTION (3) button for a few seconds until
the indicator lights for programs 4 and 5 illuminate simultaneously
(marked "end").
 Close the door.
 After approximately 1 minute the dishwasher will advance to the end
of cycle.
CHANGING THE PROGRAM
To change the program in progress, simply open the door and select a
new program. When the door is closed the dishwasher will automatically
select the new prog
ram.