Instruction manual

Installation
17
2.4 Electrical connection and precautions
The dishwasher and any additional equipment must
be connected to the electrical system by authorised,
skilled staff, in accordance with the relevant regulations;
also comply with the technical instructions for the
connection.
The total rated power is stated on the appliance’s
technical data plate.
The electrical protection devices fitted for the
dishwasher must serve this appliance only.
A master switch and a differential safety breaker,
with rating suitable for the appliance’s
characteristics must be installed on the electricity
supply line in accordance with the relevant regulation.
These switches must be installed close to the
dishwasher, be easily accessible after installation, and
provide complete disconnection from the electrical
mains in overvoltage class III conditions.
Check that the voltage and the frequency of the
mains match the ratings on the name plate of
the appliance positioned on the inner edge of
the door.
In the event of damage to the supply cord,
have it replaced by the manufacturer or an
Authorized Technical Service Centre in
order to avoid any risk.