User manual

Installation
22
5.6 Adaptation to different types of
gas
If other types of gas are to be used, the
nozzles must be replaced and the primary
air must be adjusted. In order to replace the
nozzles and adjust the burners, the hob top
must be removed.
Removing the hob top
1. Remove the grids from the hob.
2. Remove the knobs lifting them from their
housing.
3. Remove the flame-spreader crowns and
relative burner caps.
4. Unscrew the screws under each burner
to remove the fixing plate.
5. Remove the gasket on each burner's
thermocouple and igniter.