User Guide Manual SR60.. SR61.. Code : ZY600-2 ZY600-2(영).
Disposal of Used Electrical & Electronic Equipment SAFETY WARNING (R-600a Models Only) The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical & electronic equipments waste. In the European Union and Other European countries there are separate collection systems for used electrical and electronic product.
Be sure to keep for safety! Read these safety instructions thoroughly and carefully before using. Please keep this user guide on hand for future reference. Indicates the possibility of danger of death or serious injury. Indicates the possibility of risk of personal injury or material damage. Other Signs DO NOT remove or disassemble! Be sure to unplug from outlet/mains! NO. DO NOT... Be sure to keep and follow! Caution 1.
Never store any flammable gas or liquid in the refrigerator. Never use flammable gas, benzene, thinners, gasoline, spray etc. near the refrigerator. ●There is a risk of fire, explosion and personal injury or damage. If a gas leak is found near the refrigerator or in the kitchen, ventilate it immediately without touching the power plug or refrigerator. Do not store medicine or academic research samples which require strict temperature control in the refrigerator.
Installation Guide ✽ Read these safety instructions carefully before use and follow precautions for your safety. Precautions in installation and power connection ■ To prevent fire, electric shock or leakage. ❶Never install the refrigerator on a wet, watery floor or where water can gather easily. ❷Check the following before power connection. ●Connect power plug only to a grounded wall socket (an earthed mains). ●Do not plug refrigerator power together with other appliances to the same socket.
Control Panel ◆ Dispenser Model 7. Symbols on the display panel Eco mode is switched on. "Filter change required" display. After changing the filter, press the "Eco mode" button for 3 seconds. Water dispenser function is switched on. Ice cubes/Crushed ice dispenser function is swiched on. 1. 1) Selection button for freezer compartment temperature. 2) Tap the button for 3 sec, it'll set -18°C which is a recommended temperature. 2.
Temperature Control ◆ Non Dispenser Model ✽ When this refrigerator is first plugged in, the temperature mode is set to [Middle]. ◆ Dispenser Model Freezer Compartment Push the Freezer Temp. button and the setting temperature changes as the figure shows. >>> Sequential Temperature Change <<< Faster Freezing... Freezer Compartment Push the Freezer Temp. button and the setting temperature changes as the figure shows. >>> Sequential Temperature Change <<< Faster Freezing...
How to use the interior parts ◆ Non Dispenser Model ◆ Dispenser Model ❼ ❶ ⓫ ❿ ❼ ❶ ⓫ ❻ ❹ ⓯ ⓯ ❽ ❽ ❷ ❸ ❸ ❷ ❶ ❺ ❾ ❺ ⓭ ⓮ ⓬ ❶ ❺ ❾ ❺ ⓭ ⓮ ⓬ * This instruction manual refers to several models. The real features are model dependent. 1. Door storage compartment for short-term storage of food and ice cream. 2. Door storage compartment for storing frozen food. 9. Vegetable case 10. Water filter (not all models) 4. Ice cube tray (not all models) 11.
Food Storage Tips Moist-Air (humidity) Controller Wash foods before storing. Divide and separate foods into smaller pieces. You can control the amount of humidity by adjusting the control to any setting between fruit and vegetables. - Slide the humidity control toward "Fruit" to release moist air from crisper for best storage of fruit. - Slide the humidity control toward "Vegetables" to keep moist air in the crisper for best storage of fresh, leafy vegetables.
How to use the Dispenser Select the "Water" or "Ice Type" button and push the lever smoothly with your cup. Your selection will come out 1~2 seconds later. Water Ice Type Caution ●Avoid using thin fragile cups or crystal glasses when taking icecubes. ●For your safety, never insert your fingers or other tools into the dispenser outlet. ●If you find the ice cubes are discolored, stop using the dispenser and call the service agent.
Care & Cleaning ❷ ❻ ❹ ❶ Be sure to unplug first ❹ ❸ ❺ ❸ ❺ * The real features are model dependent. ❶ Dispenser Water Shelf ❹ Freezer & Refrigerator Shelves ❷ Icecubes storage Case ❺ Vegetable Case & Fruit Case ● Clean the water shelf regularly. ● R emoving: Pull up the case assembly forward to remove. ● R eplacing: Fit to the side grooves and insert to the end.
How to Clean Problem Foods in the refrigerator get frozen. Interior Parts ●Use cloth with water and mild detergent to clean. Checkup Point ❶ Is temperature set to [High]? ❷ Is the room temperature too low? ❸ Is food with moisture stored close to the cold air spout ? Action Back (Machine section) ●Remove dust on grill with a vacuum cleaner at least once a year. ❶ Set the temperature to [Middle] or [Low]. ❷ Foods can be frozen if ambient temperature is below 5℃.
Something strange? Don’t worry. Here is the answer. Case Heat Door is sticky Explanation Front and side of refrigerator feels warm or hot. ●Pipes (refrigerant vessel) are placed beneath the surface to prevent moisture forming on it. Doors do not open easily. ●When you close the door and then open again immediately, the door is not easy to open. Warm air rushes into the inside to create the pressure difference. In this case wait for a minute, then it will open easily.
Installation Preparation Check if the refrigerator can pass a doorway or enter a door first. Dimensions (including Door Handles) (Width*Depth*Height) 906mm×735mm×1770mm If the refrigerator can not pass through a door during installation, follow these steps. (This guide refers to several models. The real features are model dependent.) Removing Freezer Door ※Remove front bottom cover first, if it is attached. 1 Pull out bending tube guide and the left water tube.
Removing Refrigerator Door the hinge fastener tightly to the end. 3 Turn Connect harness wirings and screw down the ground wire. top hinge cover with a screwdriver. 1 Unscrew Insert a thin screwdriver into the side groove of the cover to remove. the bending tube guide and insert the water 4 Fasten tube far into the coupling.(Dispenser models only) top hinge fastener counterclockwise 3~4 times. 2 Turn Disconnect harness wires (model dependent).
Refrigerator Leveling & Door Adjustment (If needed) The refrigerator must be level in order to maintain optimal performance and desirable front appearance. (If the floor beneath the refrigerator is uneven, the freezer and refrigerator doors look unbalanced.) In case freezer door is lower than refrigerator door... a screw driver (flat 1 Insert tip) into a groove of the left ※ If the refrigerator door is not balanced by step 1, then follow the next steps.
Information concerning the water filter - After use, the water system is subject to low pressure. Proceed with caution when removing the filter. WATER SUPPLY KIT ※ Check the parts below for installing water supply. Some other necessary parts are available at your local service agents. - Flush the water system if the appliance has not been in use for a lengthy period, or if the ice/water has an unpleasant taste or smell. To do this, dispense water through the water dispenser for several minutes.
