Installation Instructions

Installation
16
The appliance must sit level on the floor to
ensure stability:
• Screw or unscrew the bottom part of the
foot until the appliance is stable and
level on the floor. The adjustment range
of the screw is 1
1
/
4
“ (32 mm).
Assembling the backguard
The backguard must always be positioned
and secured correctly on the appliance.
1. Assembling the backguard. You can find
the assembly instructions for the
backguard in the instructions sheet
provided.
2. Position the backguard above the top,
taking care to align the holes.
3. Secure the backguard to the top by
tightening screws.
4. Once you have fixed the backguard to
the appliance, you must insert the screws
and spacers provided that are necessary
for the slot-in installation.
NOTE: this appliance must only
use the specific leveling legs
provided by the manufacturer.
The backguard provided is an
integral part of the product; it must
be fastened to the appliance prior
to installation.