User manual

Cleaning and Maintenance
42
4. Remove the water left inside the oven.
For improved hygiene and to avoid food
being affected by any unpleasant odours,
we recommend that the oven is dried using
a convection function at 300°F for
approximately 10 minutes.
3.5 Special maintenance
Seal maintenance tips
The seal should be soft and elastic.
• To clean the seal, use a non-abrasive
sponge and wash with lukewarm water.
Replacing the internal light bulb
1. Completely remove all accessories from
inside the oven.
2. Remove the rack/tray supports.
3. Use a tool (e.g. a spoon) to remove the
bulb cover.
4. Loosen and remove the light bulb.
5. Replace the bulb with a similar one
(40 W).
WARNING
Danger of electrocution
• Unplug the appliance.
• Use protective gloves.
NOTE: The oven is fitted with two
40W light bulbs.
NOTE: Pay attention not to scratch
the oven cavity enamel.
Do not touch the halogen bulb with
your fingers; cover it with an
insulating cloth.