User manual

Cleaning and Maintenance
39
EN
Removing the oven door
To facilitate cleaning, we recommend that
you remove the door and place it on a
towel.
To remove the door, proceed as follows:
1. Open the door completely and insert two
pins into the holes in the hinges, as
shown in the image.
2. Grasp the door on both sides with both
hands, lift it forming an angle of around
30° and remove it.
3. To reassemble the door, put the hinges in
the relevant slots in the oven, making sure
that the grooved sections A are resting
completely in the slots. Lower the door
and once it is in place remove the pins
from the holes in the hinges.
Cleaning the oven door glass
The oven door glass should always be kept
thoroughly clean. Use absorbent kitchen
roll. In case of stubborn dirt, wash with a
damp sponge and an ordinary detergent.
Removing the inner glass
To facilitate cleaning, the inner glass panels
of the door can be removed.
1. Remove the inner glass panel by pulling it
gently upward at the rear, moving it as
indicated by the arrows (1).