User manual

Use
24
Now both cooking zone displays shows
level 0 and flashing red dots appear on all
displays. The Bridge function is now
activated. You can control both the linked
zones using the front left cooking zone
knob.
To deactivate the Bridge function, bring
both knobs to the OFF position.
Control lock function
The control lock is a device that protects the
appliance from accidental or inappropriate
use. Only the cooking zone knobs will be
locked. To activate the Control lock function
press and hold turn the central cooking
zone knob counterclockwise to the
position until all the cooking zone displays
show the symbols (two short beeps will
be emitted in the meantime).
To deactivate the Control lock function,
follow the previous instructions until the
symbols disappears.
2.4 Using the oven
To switch on the oven:
1. Select the cooking function using the
function knob.
2. Select the temperature using the
temperature knob.
• After about 10 seconds without
interacting with the cooktop
knobs, the cooking zone
displays will be turned off. To
check if the Control lock is active
or not, simply try to turn on any
cooking zone.
• When you activate Control lock
function, if you turn and hold the
central cooking zone knob for
more than 30 seconds, the
flashing symbol will appear
as an error message. Release
the knob to remove it.
WARNING
Fire Hazard
• Keep the oven door closed when the
appliance is in use.
NOTE: If there is no power, the
cooling fan will not work. Do not
try to switch on the oven manually.