User manual

Description
14
1.3 Control panel
1 Cooktop cooking zones knobs
Used for turning on the cooking zones and
adjusting the power levels.
The following markings appear on each
cooktop knob:
cooking zone OFF position;
, , Melting,
Keep Warm and Simmering functions;
cooking zones power
levels;
Boost mode.
Only on the front/rear left cooking zones
knobs:
Heating Accelerator and Bridge
functions;
Only on the front/rear right cooking zone
knobs:
Heating Accelerator function;
Control Lock function;
2 Hot oven indicator light
The indicator light comes on to indicate that
the oven is hot.
Each time the indicator light comes on, the
appliance emits an acoustic signal.
Depending on the set temperature (from
150 to 500°F) it will activate after about
10-12 minutes of operation.
It switches off when the oven cavity has
cooled down.
3 Temperature knob
This knob allows you to select the cooking
temperature. Turn the knob clockwise to the
required value between the minimum and
maximum settings.
4 Programmer clock
Used for displaying the current time and
setting the timer.
5 Function knob
The oven's various functions are suitable for
different cooking modes. After selecting the
required function, set the cooking
temperature using the temperature knob.
CAUTION
High temperature inside the oven.
NOTE: In Broil mode, the indicator
light remains off. It lights up at the
end of the function during the
cooling phase to indicate that the
oven is still hot.