Installation Guide

Installation
16
Installing the anti-tip bracket
1. Ensure that the electrical connection is in
the correct position.
2. Assemble the bracket.
3. Align the base of the hook of the bracket
with the base on the slot of the rear wall
fastening bracket. Align the base of the
fastening bracket with the floor and
tighten the screws to fix the
measurements.
4. For wall mounting, go to steps 5, 6, 9
and 10. For floor mounting, to steps 7, 8
and 10.
5. Use the specified distance from the side
of the appliance to the bracket holes.
6. Move the bracket to the wall and fix with
the two washers and screws. A qualified
technician must verify the suitability of the
materials in accordance with the type
and condition of the wall.
NOTE: The wall attachment is
recommended if the appliance is
placed against a wall. Floor
attachment is recommended in
case of island installation.