User Manual

Use & Installation Manual
14
Selecting the Oven Mode
Setting Cooking Mode and Temperature
• The following modes can be selected by
moving the cooking mode knob to the
desired position. To select Clean, the
temperature knob must be moved into the
appropriate Clean position too.
OFF
CONVECTION BAKE (CONV BAKE)
CONVECTION BROIL (CONV GRILL)
CONVECTION ROAST (CONV ROAST)
PIZZA (PIZZA)
BAKE (BAKE)
BROIL (GRILL)
DEHYDRATE(CONV DEHY)
PROOF (WARM)
DEFROST (CONV)
WARMING (WARM PLUS)
CLEAN
• Select the desired temperature moving the
selector or leave it in the PRESET position if
the proposed value is fine. The temperature
can be changed by 5°F or 5°C steps.
• As soon as one of the knobs is moved, the
control switches automatically to display the
value in the correspondent cavity. The
corresponding writing “UPPER” or “LOWER”
appears.
• Cavity will begin to heat, the “ON” writing is
displayed when the selected oven is active,
oven lights will turn on.
• “PREHEAT” writing will turn on. Once the
oven has preheated, it will beep and switch
the writing off.
• To change the temperature while cooking,
simply turn the temperature knob until the
display shows the desired value.
• Touch [UPPER/LOWER] to select the
desired cavity and check the related
temperature or time values, even is there’s
no need to change those.
• Move the cooking mode selector to OFF if
you intend to stop cooking.
The triangles in the upper right corner of the
display are active when a cavity is running, even
if it is not selected on the display.
Using [MENU] key to select low
temperature functions
• Moving the cooking mode selector to Low
Temp position one of the following functions
is displayed:
DEHYDRATE (CONV DEHY)
PROOF (WARM)
DEFROST (CONV)
WARMING (WARM PLUS)
• Touch [MENU] key to toggle between
these four modes.
• The last used is kept in memory for the next
selection.
Using Oven Lights
• A single light key activates the lights in either
oven.
• If [LIGHT] key is touched when both ovens
are off, lights in both the upper and lower
oven will turn on. Touch [LIGHT] key again,
and both oven lights will turn off.
• Oven lights turn on and off automatically
when the door is opened and closed.
• When an oven is in use, oven lights turn on
automatically when a mode is started. Oven
lights will turn off automatically when the
oven mode is cancelled.
• The lights do not operate in the Self-Clean
mode.
To manually control the interior oven lights in
either the upper or lower oven if one or both
ovens are in use:
1. Touch [UPPER/LOWER] and the display will
indicate which oven is selected.
2. Touch [UPPER/LOWER] to highlight the
other oven.
3. Touch [LIGHT] to turn lights on or off in the
desired cavity.
Use & Installation Manual
15
Time Oven Mode Operation
• In double oven models, both ovens can be
set independently to operate a timed mode.
• Be sure that the time-of-day clock is
displaying the correct time.
• The timed mode turns off the oven at the end
of the cook time.
To Set a Timed Mode
1. Select the oven by means of
[UPPER/LOWER] key, if necessary.
2. Select the cooking mode and the
temperature by means of the knobs. The
“ON” writing will appear in the display.
3. Touch [TIME] key until the “TIME” writings
will appear in the display.
4. Touch [INC] or [DEC], the hour digits will
begin flashing. Continue to set the desired
cooking time. Keep in mind that the time
required for the oven to reach the
temperature must be included in the set
cooking time.
5. Touch [TIME] again, the hours will be
confirmed and the minute digits will begin
flashing.
6. Touch [INC] or [DEC] to change the
minutes. Hold the key to change by 10
minutes steps. Continue to set the desired
cooking time.
7. Touch [TIME] once again or wait for a few
seconds to confirm the cooking time value.
.
To Delay the Start of a Timed Mode
Follow steps 1 through 6 or 7 above.
• Touch [TIME] key until “STOP TIME” will
appear in the display.
• The control automatically calculates and
display the initial value, adding the cooking
time already set to the time of day.
• Touch [INC] or [DEC], the hour digits will
begin flashing. Continue to set the desired
stop time.
• Touch [TIME] again, the hours will be
confirmed and the minute digits will begin
flashing.
• Touch [INC] or [DEC] to change the minutes.
Hold the key to change by 10 minutes steps.
Continue to set the desired stop time.
• Touch [TIME] once again or wait for a few
seconds to confirm the stop time value.
• The clock automatically calculates the time of
day at which the mode starts and stops. The
“DELAY” writing is displayed until the starting
time is reached.
When a Timed Mode is running
• As soon as the oven actually starts cooking,
the display shows the cooking time and
counts down by one minute steps. The oven
will cook for the programmed time.
• When the time expires, the oven
automatically turns off, the writings “ON” and
“TIME” start flashing and an “end of activity”
beep sequence sounds. Reminder beeps will
sound for up to fifteen minutes until any key
is touched in order to recall the user
attention.
How to check a time value
• Whenever it’s necessary to check a time
value that is not displayed, touch the [TIME]
key until the proper writing is displayed to
view the desired value for 5 seconds.
• Example: if the timer value is displayed and
you want to check the cooking time, touch
the [TIME] key until “TIME” is displayed to
view the cooking time for 5 seconds.
Use & Installation Manual
14
ENGLISH
15