User manual

Cleaning and Care
38
4 Cleaning and Care
4.1 Instructions
4.2 Maintenance
All service should be performed by an
authorized service representative.
4.3 Cleaning the surfaces
To keep the surfaces in good condition,
they should be cleaned regularly after use.
Use a soft cloth or a microfibre cloth to
clean the surfaces.
4.4 Cleaning the multi-food grinder
accessory
Completely disassemble the multi-food
grinder using the spanner to loosen the
fastening ring nut on the body of the multi-
food grinder.
Food residue can be removed from the
multi-food grinder discs using the silicone
disk cleaning accessory contained inside
the cap of the pusher accessory.
This accessory is composed of two profiles
which adapt perfectly to the type of grinder
disc to be cleaned.
The multi-food grinder accessory body,
feed screw, fastening ring nut, cutter and the
three grinder discs must not be washed in a
dishwasher. They should be washed by
hand using lukewarm water and neutral
soap.
The other components may be washed in
the dishwasher.
Ensure all parts of the multi-food grinder
accessory are thoroughly dry before putting
them away or reinstalling them.
Improper use
Danger of electrocution
• Switch off and unplug the stand mixer
before cleaning it and its standard and
optional accessories.
Improper use
Risk of damage to surfaces
• Do not use steam jets for cleaning the
multi-food grinder accessory.
• Do not use cleaning products that
contain chlorine, ammonia or bleach.
• Do not use abrasive or corrosive
detergents (e.g. powder products, stain
removers and metallic sponges).
• Do not use rough or abrasive materials
or sharp metal scrapers.