User manual

Use
33
EN
3.3 Installing on the stand mixer
attachment
1. Turn off the stand mixer by moving the
stand mixer speed selector (1) to the ‘0’
(OFF) position.
2. Remove the plug from the power socket.
3. Press the release button (2).
4. Hold down the button and raise the
head (3), accompanying its movement
with your hand.
5. Remove any standard accessories
(dough hook, wire whisk, flat beater)
which may be fitted.
6. Grasp the front attachment hub cover (4)
at the centre and turn it clockwise.
7. Pull the cover (4) to remove it.
1
2
3
4
4