User manual

Use
32
4. To remove the grinder disc, unscrew the
fastening ring nut, using the supplied
spanner (6), if required, being very
careful of the cutter.
How to install the sausage stuffer
accessory
1. Install the sausage stuffer support (1) on
the end of the feed screw (2).
2. Place the sausage stuffer tube (3) against
the support (1).
3. Insert the fastening ring nut (4) and screw
it onto the body of the multi-food grinder,
without overtightening.
How to install the Kebbe accessory
1. Install the Kebbe accessory support (1)
on the end of the feed screw (2).
2. Fit the Kebbe accessory (3) onto the
Kebbe support (1).
3. Insert the fastening ring nut (4) and screw
it onto the body of the multi-food grinder,
without overtightening.