User manual

Use
31
EN
3.2 Assembling the multi-food
grinder body
1. Insert the feed screw (1) into the body of
the multi-food grinder (2).
How to install the multi-food grinder discs
1. Insert the cutter (3) onto the end of the
feed screw with the cutting part facing
outwards.
2. Position one of the three grinder discs (4)
supplied on the cutter (3), according to
the final texture you wish to obtain.
3. Screw the fastening ring nut (5) onto the
multi-food grinder body, using the ring
nut spanner if required, without
overtightening.
Sharp parts
Danger of cuts
• The cutter is sharp. Be very careful.
Sharp parts
Danger of cuts
• The cutter is sharp. Be very careful.