User manual

EN-20
Use
Using the pouring shield* (10)
• Fit the pouring shield onto the
upper rim of the stainless steel
bowl* after having inserted
the bowl into its base, inserted
the accessory into the lower
attachment and after having
lowered the head into the
operating position.
• Fit the pouring shield with the
opening facing outwards so
that ingredients can be added
to the bowl without having to
stop the mixer.
Caution
Remove the pouring shield to
raise or lower the head with the
accessory fixed to the lower
attachment.
• Make sure that the speed selector (3) is
in the "0" (OFF) position.
• Insert the plug into the power socket.
• Select the required speed (3) to start
the appliance and begin mixing the
ingredients. See “Recommended
speeds”.
Caution
• For increased safety, each
time power is disconnected
to the motor, for example by
raising the head or unplugging
the appliance from the socket,
the speed selector first has to
be placed in the zero position
before the mixer is restarted.
• You should anyway always
move the speed selector to
the 0 (OFF) position before
pressing the button to move the
motor head.
Caution
• Do not touch the accessories
while the appliance is in
operation.
• Do not operate the mixer with
the accessory inserted and the
bowl empty.
It is possible for the motor head
to move slightly when mixing
or kneading dense mixtures or
large quantities. This should be
considered normal and will not
compromise the operation or long
lifetime or the appliance.
* Standard only on certain models. Also available as an
optional accessory.