User manual

Cleaning and Care
25
EN
4 Cleaning and Care
4.1 Instructions
4.2 Maintenance
All service should be performed by an
authorized service representative.
4.3 Ordinary daily cleaning
To properly care for the surfaces, use a
damp cloth to clean them regularly after
every use.
Then use a soft rag or microfiber cloth to
carefully dry them.
The splash-proof pouring shield* and the
wire whisk can be washed by hand using
mild dish soap and a soft sponge.
The dough hook, the flat beater and the
stainless steel bowl* can be washed in the
dishwasher.
The glass bowl* can be washed by hand
with hot water and mild dish soap or in the
dishwasher using a low-temperature setting
(maximum 50°C/122°F).
The ring at the base of the bowl can be
removed and washed separately.
The flex edge beater* can be washed in
the dishwasher.
To make cleaning easier, the silicone edges
can be removed and washed in the
dishwasher.
Improper use
Danger of electrocution
• Switch off and unplug the appliance
before cleaning the mixer and its
attachments and accessories.
Improper use
Risk of damage to surfaces
• Do not use steam jets to clean the
appliance.
• Do not use cleaning products containing
chlorine, ammonia or bleach on steel
parts or parts with metallic finishes (e.g.
anodized, nickel- or chrome-plated).
• Do not use abrasive or corrosive
detergents (e.g. powder products, stain
removers and metallic sponges).
• Do not use rough or abrasive materials
or sharp metal scrapers.
If liquid or solid ingredients splash
out of the bowl, remove them
immediately with a soft, damp
cotton cloth.
*Standard only on certain models. Only available as an optional accessory.