User Manual

Cleaning and Care
26
4.4 What to do if...
Problem Possible cause Solution
The motor will not start
The motor has overheated.
Disconnect the mixer from
the power and leave the
motor to cool.
The plug is not properly inserted in
the power socket.
Insert the plug into the
power socket. Do not use
adaptors or extensions.
Check that the breaker is
on.
The cable is defective.
Have the cable replaced at
an Authorized Service
Center.
Lack of power.
Check that the house main
breaker is on.
The head has been raised during
operation.
The safety lock system has
operated. Move the speed
selector to 0 (OFF), press
and hold down the button
on the rear to release the
head and lower it.