Instructions

Cleaning and Care
27
EN
The mixer vibrates
The mixer is not resting on a stable
surface.
Place the mixer on a flat,
stable surface.
The anti-slip rubber feet are worn.
Have them replaced at an
Authorized Service Center.
The speed used is too high or the
load is excessive.
Set a lower speed and
ensure the bowl has not
been overfilled.
The bowl has not been correctly
locked into its base.
Check that the bowl is
correctly locked into its
base.
The attachments hit the
walls of the bowl
The lower attachment shaft has
come loose over time.
Have the mixer checked
and adjusted at an
Authorized Service Center.
The attachment or the bowl is not
properly inserted.
Turn the speed selector to
0, press the button on the
back to lift the head to
check that the attachment is
inserted correctly in the
lower attachment shaft and
that the bowl is inserted
correctly in the base.
Problem Possible cause Solution