Use and Care Manual

Cleaning and care
47
ENITEN
The mixer vibrates
The mixer is not resting on a stable
surface.
Place the mixer on a flat,
stable surface.
The anti-slip rubber feet are worn.
Have them replaced at an
Authorised Service Centre.
The speed used is too high or the
load is excessive.
Set a lower speed and
ensure the bowl has not
been overfilled.
The bowl has not been correctly
locked into its base.
Check that the bowl is
correctly locked into its
base.
The accessory hits the
bottom of the bowl
The lower attachment has come
loose over time.
Have the mixer checked
and adjusted at an
Authorised Service Centre.
The accessory is not correctly
locked into position.
Move the speed selector to
0, press the button on the
rear of the appliance to
raise the head and check
that the accessory is
correctly locked into
position in the lower
attachment.
Problem Possible cause Solution