Instruction manual

Installation
62
Testing
At the end of installation, carry out a brief
inspection test. If the hob fails to operate,
after checking that you have carried out the
instructions correctly, unplug the appliance
and contact Technical Support.
5.2 Instructions for the installer
• Do not bend or trap the power cable.
• The appliance must be installed
according to the installation diagrams.
• If the appliance does not work correctly
after having carried out all the checks,
contact your local Authorised Service
Centre.
• Once the appliance has been installed,
please explain to the user how to use it
correctly.
5.3 Power control menu (for installer
only)
The power control menu allows you to set the
maximum power supplied by the appliance.
Complete the following within 2 minutes of
switching off the appliance:
1. Press and hold the and
buttons until you hear the buzzer.
2. Press the middle of the two scroll bars of
the right zones until you hear the buzzer.
3. The timer display shows .
4. Use the left-hand scroll bar to increase or
decrease the power level (associated
with a progressive number, shown in the
number icon).
5. Press and hold the button to save
the modifications.
6. Press and hold the button to discard
the modifications.
Power level table
Mod. 60 cm
Level 0 (P0 - default)
7400 W
Level 1 (P1)
6000 W
Level 2 (P2)
5500 W
Level 3 (P3)
5000 W
Level 4 (P4)
4000 W
Level 5 (P5)
3500 W
Level 6 (P6)
2800 W
Level 7 (P7)
2400 W