Instruction manual

Use
55
EN
Grill Function
To activate the Grill function:
1. Place a griddle or a long pan on the right
zones.
2. Press the button. The LED above it
will flash.
The symbol appears on the front
zone display and the symbol
appears on the rear zone display. The
scroll bar will be set automatically to level 8
(preheating phase).
After two minutes of operation, the power
will be reduced to level 6. The LED above
the Grill button will stop flashing.
Use the scroll bar to modify the power level
at any time.
Press the button to deactivate the Grill
function.
Controls lock
This function locks all the buttons except for
the button. It is useful when cleaning
the appliance and to prevent functions
being activated accidentally.
To activate the control lock:
• Press the and buttons at the
same time for at least one second.
The symbol is shown for each cooking
zone.
To deactivate the control lock:
• Press the and buttons again
for at least one second.
3.5 Additional functions
Rapid heating
The rapid heating function heats one
cooking zone at maximum power for a
limited time, after which it continues cooking
at the set power level.
After selecting a cooking zone:
• Press and hold a power level (from 1
to 9) for at least 3 seconds.
• The symbol appears on the display
of the cooking zone alternating with the
selected power level.
When the power comes back on
after a power failure, the pause
function will be deactivated.
This function is used to activate the
Multizone function automatically
for the right zones only. It is used
when using a griddle or cooking
with long pans.
At least one cooking zone must be
active in order for this function to
be used.
This function is not available for the
Booster, Double booster and
Warming functions.