Instruction manual

Instructions
34
• Do not spill sugar or sweet
mixtures on the cooktop during
cooking.
• Do not place materials or
substances that could melt (plastic
or aluminium foil).
• Do not put empty pans or frying
pans on switched on cooking
zones.
• Do not use rough or abrasive
materials or sharp metal scrapers.
• Do not use cleaning products
containing chlorine, ammonia or
bleach on steel parts or parts with
metallic surface finishes (e.g.
anodizing, nickel- or chromium-
plating).
Installation
• THIS APPLIANCE MUST NOT BE
INSTALLED IN BOATS OR
CARAVANS.
• Position the appliance into the
cabinet cutout with the help of a
second person.
• Check that the piece of furniture
material is heat resistant.
• Check that the piece of furniture
has the required slots.
• To prevent overheating, the
appliance must not be installed
behind a decorative door or a
panel.
• Have the electrical connection
performed by authorised persons.
• The appliance must be connected
to earth in compliance with
electrical system safety standards.
• Use cables withstanding a
temperature of at least 90°C.
• The tightening torque of the
screws of the terminal supply
wires must be 1.5 - 2 Nm.
• The power cable must only be
installed and replaced by
authorised persons.
• If the electrical supply is restricted,
means of all-pole disconnection
must be accessible and
incorporated in the fixed wiring in
accordance with the wiring rules.
For this appliance
• If cracks or fissures form, or if the
glass ceramic cooking surface
breaks, turn off the appliance
immediately. Disconnect the
power supply and call Technical
Support.
• Avoid hard, solid objects falling
on the cooking surface.
• Do not use the cooktop if the
pyrolytic cycle is taking place
inside any oven installed below.
• Do not touch or clean the cooktop
surface during operation or when
the residual heat indicator lights
are still on.
• Activate the control lock when
you have children or pets which