User manual

Use
48
5. Extract the tube from its seat and immerse
its end in the jug (or container) until it
reaches all the way to the bottom.
6. Press the symbol to start filling the
appliance reservoir with water.
7. At the end press “ok” to confirm that you
have finished filling the reservoir.
8. Shake the tube in order to remove any
remaining water.
9. Return the tube to its original position,
remove the jug (or container) and close
the door.
The device charges a quantity of
water until the tank is completely
filled.
When the door is closed, an
automatic system will automatically
draw in any residual water in the
tube to avoid drips. A bubbling
noise may be heard; this is
completely normal.