User manual

Use
15
EN
Reactivating the display
If the Eco-Light mode is active (see “Eco-
Light” in the “Settings” section), the display
will switch off 2 minutes after the appliance
was last used.
To reactivate the display when it is off:
• Press the ON/OFF button.
The appliance will emit a series of sounds
and the display will switch on after a few
seconds. The display shows the current time
screen when it is switched on again.
Home screen
Press the time on the display window. It will
then be possible to select the various
available functions from the appliance's
home screen.
1 Settings
2 Programs
3 Cooking functions
4 Special features
5 Personal programs
For safety reasons, at the first electrical
connection or after a power failure, if there
is even a small amount of water inside the
reservoir, at the end of the first function set
(even without using steam), the display will
show the request to drain the reservoir.
• Drain the reservoir as described in the
section “Removing the residual water”.