User manual

Installation
11
EN
1.5 Positioning
Important instructions
For best results, follow these instructions
before and during the oven installation:
• Decide on the final location of the oven.
Locate the existing wiring to avoid drilling
into or severing wiring during installation.
• To avoid damage to the floor, place the
oven on cardboard prior to installation.
Do not lift by the door handle or any part
of the frame or trim.
• Remove the shipping materials and tape
from the oven.
• Remove the literature contained in the
package.
• Remove and set aside racks and other
parts from inside the oven.
• Move the oven on the cardboard close
to the oven’s final location.
Heavy appliance
Danger of crushing injuries
• Position the appliance into the cabinet
cutout with the help of a second person.
• Failure to do so can result in back or
other injury.
Pressure on the open door
Risk of damages to the appliance
• When positioning the appliance during
installation, do not
use the door handle
to lift or move this appliance.
• Never use the oven door to lever the
appliance into place when fitting.
• Avoid exerting too much pressure on the
oven door when door is open.
Heat production during appliance
operation
Risk of fire
• Check that the cabinet material is heat
resistant.
• Check that the cabinet has the required
slots.