User Guide

Cleaning and Maintenance
71
EN
Setting the programmed Vapor Clean
cycle
The Vapor Clean cycle can be set for a
certain time, just like all the cooking
functions.
1. After having selected the special Vapor
Clean function, press the symbol.
2. Enter the time you want the Vapor Clean
function to end. For example, at 7:30 pm
(19:30 on the 24-hour clock): first press
the hour box, then the numbers 1 and 9,
then press the minutes box and the
numbers 3 and 0. Remember that the
oven operates on a 24-hour clock, not a
12-hour clock).
3. Press the symbol to confirm.
4. The appliance will wait until the
appropriate start time to begin the
cleaning cycle.
End of the Vapor Clean cycle
5. Open the door and clean the least-
stubborn residue with a microfiber cloth.
6. Use a brass scratch-proof sponge on the
toughest residues.
7. For fat residues, use products specifically
formulated for cleaning ovens.
8. Remove any remaining water from inside
the oven.
For greater hygiene and to ensure food
does not absorb unpleasant odors, dry the
inside of the oven using the convection
setting at 320°F for about 10 minutes.
We recommend using rubber
gloves while carrying out these
tasks.
To make it easier to manually clean
the most hard-to-reach spots, we
suggest removing the door.