User Manual

Use
17
EN
10. Press the function knob. A request to fill
the tank with water is shown on the
display.
Filling the tank
11. Fill a container (e.g. a jug) with sufficient
water for the cooking duration.
12. Open the oven door.
13. Rest the container on the open door.
14. Extract the tube from its seat and
immerse its end in the container until it
reaches all the way to the bottom.
15. Press the function knob to start drawing
water into the appliance's tank.
• Use cold tap water which is not
too hard, softened water or still
mineral water.
• Do not use distilled water, tap
water with a high chloride
content (> 40 mg/l), or other
liquids.
Note: the container with the water
must have a gross weight lower
than 5 kg.
The appliance will automatically
draw the quantity of water
necessary for cooking on the basis
of the set duration.
In the event that the water runs out,
the appliance will automatically
stop the cooking process, a
buzzer will sound and the display
will show a request to fill the tank
with water.