User Manual

Cleaning and maintenance
47
EN
When the cleaning process is complete, a
buzzer will sound and the display will show
the solution draining screen.
11. Remove the cover from the evaporation
tray and dry it with the sponge supplied.
12. We recommend inserting the supplied
sponge into the evaporation tray.
13. Press the function knob to begin
draining the residual solution from the
tank.
The residual solution is discharged into the
evaporation tray.
Being the remaining quantity of solution
over 500 ml, the solution will be discharged
into the evaporation tray in two different
steps to facilitate drying. The display will
show “STEP 1” when the first stage has
finished, and draining will stop. You must
press the function knob again to complete
the draining with “STEP 2”. When this has
completed, “END” will be displayed.
14. Use the supplied sponge to remove the
residual solution from the evaporation
tray.
After cleaning the tank with the
water and citric acid solution,
perform at least one more CLEAN
cycle with clean water in order to
rinse any impurities from the tank.