Instruction manual

Use
17
EN
Each time the temperature knob is pressed
during a function, it will cycle through the
parameters in the following order.
The value can be changed in any mode by
turning the temperature knob to the left or
right. Keep the knob turned to produce a
faster increase or decrease.
If a microwave function has been
activated:
1. Microwave power level.
2. Function duration.
If a Microwave + Grill function has been
activated:
1. Temperature.
2. Function duration.
3. Microwave power level.
If a Grill function has been activated:
1. Temperature
2. Minute minder timer duration.
3. Function duration.
4. Programmed cooking duration (if timed
cooking has been selected).
5. Time display.
Setting the time
On the first use, or after a power failure,
will flash on the appliance’s
display. The current time must be set in order
for any cooking function to be started.
1. Turn the temperature knob to set the hour
displayed (to increase or decrease it
more quickly keep the knob turned to the
right or left).
2. Press the temperature knob.
3. Turn the temperature knob to set the
minutes (to increase or decrease it more
quickly keep the knob turned to the right
or left).
4. Press the temperature knob to complete
the setting.
It may be necessary to change the
current time, for example for
daylight saving time. From stand-
by mode, keep the temperature
knob turned to the right or left until
the hours flash.
It is not possible to change the time
if the oven is ON.