User manual

Installation
33
EN
Adjusting the minimum
The oven thermostat is equipped with a
screw to adjust the minimum. When
changing the type of gas supply, the
minimum must be adjusted as follows:
1. Switch off the electrical supply to the
appliance.
2. Pull the oven slightly out of its housing,
remove the knobs and remove the front
by unscrewing the four screws (two
upper and two lower) that attach it to the
rest of the unit.
3. Push in the oven thermostat knob and
light the oven burner. Keep it at the
maximum for 10-15 minutes with the
door closed. After this, turn the knob to
the minimum temperature.
4. Remove the knob and use a screwdriver
to adjust the hole.
5. In case liquid gas will be used, the
adjustment screw must be screwed
clockwise as far as it will go.
Burner and nozzle specifications tables
Natural gas G20 – 20 mbar OVEN GRILL
Rated heat capacity (kW)
2.6 2.2
Nozzle diameter (1/100 mm)
120 110
Reduced capacity (W)
900 -
LPG G30/31 - 30/37 mbar OVEN GRILL
Rated heat capacity (kW)
2.6 2.2
Nozzle diameter (1/100 mm)
76 72
Reduced capacity (W)
900 -
G30 capacity (g/h)
189 175
G31 capacity (g/h)
186 171