User manual

Cleaning and maintenance
171
EN
6. Refit the panes in the reverse order in
which they were removed. Make sure
that the upper shaped part of the
intermediate glass unit is facing upwards
towards the handle.
7. Reposition the internal glass pane. Insert
the front part into the relative seats (1).
Then lower the rear part and insert the 2
pins into their housings in the oven door
by applying slight pressure (2).
8. Remove the pins from the hinges.
4.4 Cleaning the oven cavity
For the best oven upkeep, clean it regularly
after having allowed it to cool.
Take out all removable parts.
Clean the oven racks with warm water and
non-abrasive detergents. Carefully rinse
and dry damp parts.
The oven should be operated at
the maximum temperature for
about 15-20 minutes after the use
of specific products, to burn off the
residues left inside the oven.
For easier cleaning, remove the
door.