User manual

EN
Instructions for the User
41
14.2 Replacing the light bulb
WARNING: Ensure that the appliance is switched off before replacing the
lamp to avoid the possibility of electric shock.
To replace the light bulb, proceed as follows:
 Disconnect the oven from the power supply. Take the plug out
of the socket or switch off the oven’s power circuit.
 Unscrew and remove the glass light cover (1).
 Remove the light bulb (2). Warning! The bulb may be very hot.
 Fit a new E14 230-240V/15W bulb. Follow the lamp manufacturer’s
instructions. IMPORTANT NOTE: Make sure that the sealing rings (3)
are applied in the correct sequence.
 Screw the glass light cover into place (1).
 Connect the oven again to the power supply.