Instruction manual

Use
84
6. If a function end time has been set, the
following screen will be shown giving all
information. The appliance will change
to cooling mode while waiting for the
function to be started. In this condition it is
still possible to modify the function end
time by pressing the button.
7. Press to start the function.
8. The appliance will enter conservation
mode at 3°C while it waits for the
function start time.
9. If no function end time is set, press the
button to start proving. The screen will be
displayed to show that the function is in
progress.
When setting the function end time,
take into account the duration of
the function itself.
If, for example, you set the function
at 22:00 with an end time of
23:30 for a function duration set to
2 hours, the appliance will start the
function with a delay of 24 hours,
and the appliance will show the
conservation at 3°C screen while
it waits for the set time to start up
the function.