Instruction manual

Use
73
EN
4. Insert the probe into the food without
going all the way through, then press
the button to start the function.
5. Once the function has started, the
following screen will appear. The screen
remains active until the temperature
displayed next to the probe symbol
(55°C) is the same as the temperature
above the function symbol (3°C).
6. As soon as the temperature of 3°C is
reached, the appliance will beep, and
the function progress bar and the
temperature will no longer be displayed.
7. The appliance automatically switches to
the conservation function and will remain
in this state until the user interrupts it with
the button.
8. If the function is started without the probe
being inserted, the following screen will
appear:
9. Press “ok” and insert the probe. If the
probe has not been (correctly) inserted,
the following screen will be displayed:
10. Open the door and check that the
probe is correctly inserted.
Insert the probe transversely,
ensuring at least 3/4 of its length is
inside the foodstuff.