User manual
Ventilation requirements
The airflow behind the appliance must be
sufficient.
5 cm
min.
200 cm
2
min.
200 cm
2
CAUTION! Refer to the
assembly instructions for the
installation.
OPERATION
Control panel
1 2 3 4 5
1
Power indicator light
2
Temperature regulator
3
Super light
4
Super switch and alarm reset switch
5
Alarm light
Switching on
Connect the appliance to the main power
supply.
1. Turn the Temperature regulator
clockwise to a medium setting.
The power indicator light will light up and a
sound will signal for 2 seconds.
If the temperature inside the
appliance is too high, the Alarm
light will blink and the sound
signal alarm will turn on.
2. Push the Super switch and the sound
signal alarm will get off.
3. Push the Super switch once again and
the Super light will light up. The
appliance will start to operate.
Switching off
Turn the Temperature regulator to the "O"
position and a sound is on only for 2
seconds .
The power indicator light will switch off.
Temperature regulation
The temperature is regulated
automatically. However, you can set a
temperature inside the appliance yourself.
19