User manual

Cleaning and Maintenance
20
3. Dry thoroughly with a soft cloth or a
microfiber cloth.
4. Replace the components on the hob.
Flame spreaders and burner caps
For easier cleaning, the flame spreaders
and the burner caps can be removed.
Wash them in hot water and non-abrasive
detergent. Carefully remove any
encrustation, then wait until they are
perfectly dry. Refit the flame spreaders
making sure that they are correctly
positioned in their housings with their
respective burner caps.
Visually checking pilot(s) and burner flames.
Cleaning the igniters and thermocouples
• If necessary, clean the igniters and
thermocouples with a damp cloth.
• If there is any dry residue, remove it with
a toothpick or needle.
Continuous contact between the
grates and the flame can cause
modifications to the enamel over
time in those parts exposed to
heat. This is a completely natural
phenomenon which has no effect
on the operation of this
component.