Instruction manual

Installation
86
Appliance dimensions (mm)
Position of gas and electrical connections.
(seen from below)
65 cm
75 cm
90 cm
Flush installation (version without strips
only)
After laying the adhesive seal (A) on the
glass surface and after positioning and
securing the hob, fill the edges with
insulating silicone (B) and wipe away any
excess.
In the event the hob needs to be removed,
cut the silicone using a cutter before
attempting to remove it (C).
Dimensions flush with top (mm)
X = Gas Connection
Y = Electrical connection
A35
B70
A B C D E F G
560 654 47.5 21 20 57.5 47
724 754 53 21 20 57 15
844 904 47 23 33.5 96.5 30