Instruction manual 4
Table Of Contents
- Important safety instructions
- 2. COOKTOP MEASUREMENTS
- 3. POSITIONING THE COOKTOP AND LOCATION REQUIREMENTS
- 1 Remove all packaging parts (e.g. crate, carton, polystyrene and metal hooks). Do not eliminate this manual as it is an integral part of the appliance and it should be kept handy for easy reference whenever needed.
- 2 Temporarily remove all removable parts from the cooktop that could fall and cause personal injury or damage to objects (burners, crowns and flame caps) during the attachment procedures These parts must be refitted before using the appliance.
- 3.1 Gas supply requirements
- 3.2 Electrical requirements
- 3.2.1 Recommended Grounding Method
- 4. INSTALLING THE COOKTOP
- 5. CHECKING OPERATION
- 1 a spark must light on all burners when the knobs on the top are pressed
- 2 when each knob on the cooktop is pressed and turned to the low flame symbol ( ), the entire crown should light.
- 3 lf burners do not light properly, turn the control knob to the "OFF" position O . Check that burner caps and crowns are in the proper position. Check that the power supply cord is plugged in and that circuit breaker or house fuse has not blown. Che...
- 6. WIRING DIAGRAMS
Instructions for the Installer
7
Cooktop
widht
MINIMUM DISTANCE
A B C D E F G
34
1
/
8
”
867 mm
33
3
/
8
”
847 mm
19”
482 mm
8
1
/
4
”
210 mm
2 ”
50 mm
2 ”
50 mm
2 ”
50 mm
34
1
/
8
”
867 mm
NOTE: 13" (330 mm) is the maximum recommended upper cabinet depth.
Gas line opening
Wall: everywhere, 5” (12.7 cm) below underside of countertop.
Cabinet base: everywhere, within 6” (15.2 cm) from rear wall is recommended.
Grounded outlet
Locate within 24” (61 cm) from the right rear corner of the cut out drawer.