User manual

Installation
50
After these operations, secure the
appliance through the supplied special
brackets (A) to get a perfect level,
according to the instructions in the picture.
Overall dimensions: gas and electrical
connection location (measurements in
mm)
B Electrical connection
C Gas pipe connection
Right view
Rear view
The brackets should be placed
only after the hob has been laid on
the seal.
• If necessary, do not fix the hob
using silicone as this would make
it impossible to remove the hob
without damaging it.
• If a laminated top is used, lay a
film of anti-infiltration primer on
the milled surface.