Programs table

Table Of Contents

4.10 SWITCHING ON THE APPLIANCE AND SELECTING THE WASHING PROGRAMME

To switch on the appliance and select the programme, proceed as follows:

1. Turn the programmes knob in either direction. This switches on the washer-dryer.

2. Select the washing programme. The time left to the end of the programme and the max-

imum recommended weight for the selected programme alternate on the display. The sym-

bols on the display light up to identify the information shown.

3. The default spin speed and temperatures values are shown. The initial settings can be

modified using the button underneath the sequence of spin speeds and temperatures.

4. If spin speed is set, there will be no spin cycle and the appliance will stop with

the tank full. If this value is set the appliance does not perform the final spin and the washing

programme ends with water in the tank.

Time to end

Max recommended weight

Spin Speed selection

Washing Temperature selection