LBS85 LBS65 Washing Machine Lavatrice
1 Warnings General Safety • Never place your machine on a carpet covered floor. Otherwise, lack of airflow from below of your machine may cause electrical parts to overheat. This may cause problems with your washing machine. • If the power cable or mains plug is damaged you must call Authorized Service for repair. • Fit the drain hose into the discharge housing securely to prevent any water leakage and to allow machine to take in and discharge water as required.
2 Installation with the machine to the water intake valves on the machine. Removing packaging reinforcement Tilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon. Opening the transportation locks A Transportation safety bolts must be removed before operating the washing machine! Otherwise, the machine will be damaged! 1. Loosen all the bolts with a spanner until they rotate freely (“C”) 2.
too long you may have it shortened. • The maximum length of the combined hoses must not be longer than 3.2 m. Correct load capacity Electrical connection Loading door C Please follow the information in the "Program Selection Table". Washing results will degrade when the machine is overloaded. Connect the machine to an earthed outlet protected by a fuse of suitable capacity. Important: • Connection should comply with national regulations.
4 Selecting a program and operating your machine Control panel 2 4 3 5 12345- * According to your machine’s model Turning the machine on You can prepare the machine for program selection by pressing the “On/Off” button. When the “On/Off” button is pressed, the “Ready” light illuminates indicating that the door is ulocked. Press the “On/Off” button again to shut down the machine.
compared to the “Cottons” program. It is recommended for your synthetic clothes (such as shirts, blouses, synthetic/cotton blended garments, etc.). For curtains and lace, the “Synthetic 40” program with prewash and anti-creasing functions selected is recommended. •Delicates You can wash your delicate clothes on this program. It has more sensitive washing movements and does not make intermediate spinning compared to “Synthetic” program.
Max. Load (kg) Programme Duration (~min) Water Consumption (l) Energy Consumption (kWh) Prewash Rinse Plus Anti Piega Rinse Hold Spin speed reduction No Spin No Heat Program selection and consumption table Cottons 90 5 155 45 1.70 • • • • • • Cottons 60** 5 145 49 0.95 • • • • • • Cottons 40 5 150 49 0.65 • • • • • • Synthetics 60 2.5 120 55 0.90 • • • • • • Synthetics 40 2.5 125 55 0.55 • • • • • • Synthetics 30 2.5 110 55 0.
Auxiliary functions Spin speed reduction Auxiliary function selection keys Select the required auxiliary functions before starting the program. C Auxiliary function buttons may differ according to the model of your machine. Auxiliary function selection If an auxiliary function that should not be selected together with a previously selected function is chosen, the first selected function will be cancelled and the last auxiliary function selection will remain active.
cancelled or selected in accordance with the step the program is at. The door can be opened if the water level is suitable. Laundry may be added / taken out by opening the door. Child-proof lock You can protect the appliance from being tampered by children by means of the childproof lock. In this case, no change can be made in the running program. The machine is switched to child-lock by pressing the 1st and 2nd auxiliary functions from the left for 3 sec.
carefully to their places and tighten the hose nuts by hand. Draining any remaining water and cleaning the pump filter Your product is equipped with a filter system which ensures a cleaner water discharge that extends pump life by preventing solid items such as buttons, coins and fabric fibers from clogging the pump propeller during discharge of the washing water. • If your machine fails to drain the water, the pump filter may be clogged. You may have to clean it every 2 years or whenever it is plugged.
6 Solution suggestions for problems Problem Cause Machine may have to self Program cannot switched protection mode due to be started or an infrastructure problem selected. (such as line voltage, water pressure, etc.). Explanation / Suggestion Reset your machine by pressing “Start/Pause/ Cancel” button for 3 seconds. (see, Canceling a Program) There is water coming from the bottom of the machine. There might be problems with hoses or the pump filter.
7 Specifications Models LBS85 LBS 65 Maximum dry laundry capacity (kg) 5 5 Height (cm) 84 84 Width (cm) 60 60 Depth (cm) 54 54 Net Weight (kg) 62 61 Electricity (V/Hz.) 230 V / 50hz 230 V / 50hz Total Current (A) 10 10 Total Power (W) 2300 2300 Spinning cycle (rpm max.) 800 600 Specifications of this appliance may change without notice to improve the quality of the product. Figures in this manual are schematic and may not match your product exactly.
