LBS85-9 LBS65-9 Washing Machine Lavatrice
1 Warnings marked accordingly. Safety instructions General Safety • Never place your machine on a carpet covered floor. Otherwise, lack of airflow from below of your machine may cause electrical parts to overheat. This may cause problems with your washing machine. • If the power cable or mains plug is damaged you must call Authorized Service for repair. • Fit the drain hose into the discharge housing securely to prevent any water leakage and to allow machine to take in and discharge water as required.
2 Installation Removing packaging reinforcement Tilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon. Opening the transportation locks A Transportation safety bolts must be • If you are going to use your double waterinlet machine as a single (cold) water-inlet unit, you must install the stopper*, supplied with your machine to the hot water valve.
Loading door • The maximum length of the combined hoses must not be longer than 3.2 m. The door locks during program operation and the Door Locked Symbol lights up. The door can be opened when the symbol fades out. Electrical connection Connect the machine to an earthed outlet protected by a fuse of suitable capacity. Important: • Connection should comply with national regulations. • The voltage and the allowed fuse protection are specified in the section “Technical Specifications”.
4 Selecting a program and operating your machine Control panel 5 2 3 4 6 7 6 - On/Off Button 7 - Program Follow-up Indicators 8 - Child-proof Lock Indicator * 1 - Spin Speed Adjustment Knob * 2 - Temperature Adjustment Knob * 3 - Start/Pause/Cancel Button 4 - Auxiliary Function Buttons 5 - Program Selection Knob * According to your machine’s model Turning the machine on You can prepare the machine for program selection by pressing the “On/Off” button.
vigorous washing movements during a longer washing cycle. • Sintetici (Synthetics) You can wash your less durable clothes on this program. Gentler washing movements and a shorter washing cycle is used compared to the “Cottons” program. It is recommended for your synthetic clothes (such as shirts, blouses, synthetic/cotton blended garments, etc.). For curtains and lace, the “Synthetic 40” program with pre-wash and anti-creasing functions selected is recommended.
Program selection and consumption table EN Auxiliary functions Max. Load (kg) Programme Duration (~min) Water Consumption (l) Energy Consumption (kWh) Prelavaggio Risciaquo Aggiuntivo Antipiega Spin speed reduction Esclusione Centrifuga No Heat 2 Cotone 90 5 155 45 1.70 • • • • • • Cotone 60** 5 145 49 0.95 • • • • • • Cotone 40 5 150 49 0.65 • • • • • • Sintetici 60 2.5 120 55 0.90 • • • • • • Sintetici 40 2.5 125 55 0.
Auxiliary functions Auxiliary function selection keys Select the required auxiliary functions before starting the program. C Auxiliary function buttons may differ according to the model of your machine. Auxiliary function selection If an auxiliary function that should not be selected together with a previously selected function is chosen, the first selected function will be cancelled and the last auxiliary function selection will remain active.
This function protects the appliance from being tampered by children. In this case, all of the buttons are inactive except On/Off button; by On/Off button you can whether stop or resume (while child-lock on) the program of your machine. The machine is switched to child-lock by pressing the 1st and 2nd auxiliary functions from the left for 3 sec. 1st auxiliary function light will flash continuously. To deactivate the child-proof lock, press the same buttons for 3 sec.
Draining any remaining water and cleaning the pump filter Your product is equipped with a filter system which ensures a cleaner water discharge that extends pump life by preventing solid items such as buttons, coins and fabric fibers from clogging the pump propeller during discharge of the washing water. • If your machine fails to drain the water, the pump filter may be clogged. You may have to clean it every 2 years or whenever it is plugged. Water must be drained off to clean the pump filter.
6 Solution suggestions for problems Problem Cause Machine may have to self Program cannot switched protection mode due to be started or an infrastructure problem selected. (such as line voltage, water pressure, etc.). Explanation / Suggestion Reset your machine by pressing “Start/Pause/ Cancel” button for 3 seconds. (see, Canceling a Program) There is water coming from the bottom of the machine. There might be problems with hoses or the pump filter.
7 Specifications Models LBS85-9 LBS65-9 Maximum dry laundry capacity (kg) 5 5 Height (cm) 84 84 Width (cm) 60 60 Depth (cm) 54 54 Net Weight (kg) 61 61 Electricity (V/Hz.) 230 V / 50Hz Total Current (A) 10 Total Power (W) 10 2300 Spinning cycle (rpm max.) 800 600 Specifications of this appliance may change without notice to improve the quality of the product. Figures in this manual are schematic and may not match your product exactly.
