User manual

FIDKNOSEGRITPTESNLFRGBDE
LEDs last longer
than traditional
light bulbs, improve
internal visibility and
are environmentally-
friendly.
Contact the Service
Centre if replacement
is necessary.
Fan (if available)
The fan is preset as ACTIVE.
The fan can be deactivated
by pressing the button on the
base (as shown in the figure).
If the room temperature
exceeds 27°C, the fan must
be on in order to guarantee
the correct preservation of food.
Deactivation of the fan enables energy
consumption to be optimised.
Stand-by
Press the “Temp.” button (1) for 3 seconds to
deactivate the appliance (the control panel and
lights remain off).
Press the button again briefly to reactivate the
appliance.
Note: This does not disconnect the appliance
from the power supply.
Refrigerator compartment temperature
The three LED indicators (2) indicate the
refrigerator compartment set temperature.
A different temperature can be set using the
Temp.” button
The following adjustments are possible:
Leds lit Set temperature
High (less cold)
Medium-high
Intermediate
Medium-low
Low (colder)
QUICK GUIDE
1
2