Instruction manual

Cleaning and maintenance
31
EN
4.5 Pyrolytic cycle
Preliminary operations
Before starting the pyrolytic cycle:
• Clean the internal glass panel following
the usual cleaning instructions.
• For very stubborn encrustations spray an
oven cleaning product onto the glass
(read the warnings on the product);
leave for 60 minutes, then rinse and dry
the glass using kitchen roll or a microfibre
cloth.
• Completely remove all accessories from
inside the oven.
• Remove the rack/tray support frames.
• Close the door.
Pyrolytic function setting
1. Turn the function knob to the
symbol: The pyrolytic cycle minimum
duration (2 hours) will appear on the
display.
2. Press or to set the cleaning
cycle duration from a minimum of 120
minutes to a maximum of 3 hours.
3. Press to confirm the start of the
cleaning cycle.
Setting of programmed pyrolytic cycle
The pyrolytic cycle start time can be
programmed using the programmer clock.
4. After selecting the pyrolytic cycle
duration, press . The time when the
cleaning cycle will terminate will
appear on the display.
5. Press or to set the time at which
you wish to complete the pyrolytic
cycle and wait 5 seconds to confirm the
set data.
6. Two minutes after the pyrolytic cycle
has started the door is locked (the door
lock indicator light comes on) by a
device that prevents the door from
being opened.
The pyrolytic function consists of an
automatic high-temperature
cleaning procedure which causes
dirt to dissolve. Thanks to this
process, it is possible to clean the
oven cavity very easily.
Improper use
Risk of damage to surfaces
• Remove any food residues or large spills
from previous cooking operations from
the oven cavity.
Recommended pyrolytic cycle
duration:
• Light dirt: 120 minutes.
• Medium dirt: 150 minutes.
• Heavy dirt: 180 minutes.
It is not possible to select any
function once the door lock device
has been activated.